MAIN FEATURES
The electric pumps must always be installed with the motor in a horizontal position.
Manometric suction up to a maximum of 6 m with a bottom valve, over 3 m we recommend the installation of a suction tube with an internal diameter greater than the suction mouth. Condenser is permanently inserted in the single-phase version.
On request built-in thermo-amperometric protection. Protection supplied by the user for the three-phase version.
ADVANTAGES
They can be used in domestic and civil systems, small gardening works, for transfer, for pressurisation and distribution of water combined with autoclave tanks, for heating, cooling and circulation systems in general.
Suitable for pumping clean water without abrasive particles and chemically non-aggressive liquids.
MANUFACTURING SPECIFICATIONS
- Pump body: Cast iron
- Motor support: Cast iron or Aluminium alloy
- Impeller: Brass
- Shaft: AISI 431 stainless steel
TECHNICAL SPECIFICATIONS
- Mechanical seal: Graphite/Ceramic - Graphite/Aluminium
- Maximum Temperature: Liquid -15°C ÷ +70°C -
- Environment + 40°C
- Maximum Pressure: 10 Bar
- Engine: Asynchronous 2 poles, C.I. F, IP 44